View Mobile No.

our range

Dry Cooling Tower

Pioneers in the industry, we offer coil dry cooling tower, dry cooling tower, induction melting furnace dry cooling tower and dry type remote cooler from India.
Coil Dry Cooling Tower

Coil Dry Cooling Tower

Rs 1 Lakh  / PieceGet Best Price
Usage/ApplicationIndustrial
Cooling Capacity100KW to 50MW
BrandGold Cooling Towers
ShapeRectangular
Tower MaterialFiberglass Reinforced Polyester
Tower TypeInduced Draft
Tower DesignClosed Loop
About …

Gold Cooling Towers is a young and dynamic and leading company in the field of manufacturing New  FRP Cooling towers over the past 12 years with full-fledged mfg. capacity upto 1500TR, offering single source responsibility for complete water-cooling solutions to industry.

Introduction – DRY COOLING TOWERS (Remote Radiate)

 Now, taking more responsibility for manufacturing customer’s most required Water savage, lowest annual cost and lowest noise level towers like DRY COOLING TOWERS.

  DRY COOLING TOWERS are in a single unit can be provided incapacities

from 100KW to 1500KW and they can be multiplexed to reach many thousands of KILOWATTS.

 What Is?

A Dry Cooling Towers?

The Dry Cooling Tower consists of Air Cooled fluid coolers, water is passed through the fluid coolers and atmospheric air is forced through the external fluid coolers. The heat from the water is transferred to the cooling air and the water is cooled.

Why Dry Cooling Towers?

SAY “YES” TO ALL “NOS” BELOW.

 NO          Scale-formation                                  

NO          contamination of air

NO          frequent maintenance

NO          WATER requires after first.              

NO          Moving parts except Fan & Motor.

NO          Mixing of Dust/Dirt/Fly Ash with water

NO          need of water softening plant & Chemicals.

NO          Heat Exchanger Headaches at Primary Circuit

Installation

 The Dry Cooling Towers water line connections are flanged for quick installation and it can be used for the following major applications

 1.             POWER GENETAIONS / GENSETS 

2. AIR COMPRESSOR COOLING / AFTER COOLER / INTER COOLER/ JACKET

 Technical Specification

 Air-Cooled Fluid Coolers

 

Air-Cooled fluid coolers are being produced in our most modern plant of International standards. The design, selection, construction of air-cooled fluid coolers are through computer which gives very accurate thermal transfer. The Tubes and fins can be Copper, Aluminum.

 Fans

Axial flow fans are directly driven by motor. The fans are of aluminum die cast with adjustable pitch and are individually tested for different flow rate. They are all dynamically balanced. Since, the complete fan is of aluminum alloy it does not corrode when used in outdoor application.

 Motor

 The motors are IP 55 Class with F class insulation and low rpm of the motor minimize noises and increases efficiency. Motors are specially designed to take the moisture / rain, dust and to withstand atmospheric temp. up-to 120oC.

 Enclosure

 Mild steel sheets of heavy gauge steel are used for enclosure construction. The units are powder coated with 80 microns

Base Frame

The entire unit is assembled on heavy duty channel base frame and it can be placed in open ground or can be mounted on roof top depending upon the job site requirements. The structures are rigid and are painted suitably to give protection against corrosion.


View Complete details

get quoterequest a call back
  • Dry Cooling Tower
  • Dry Cooling Tower
  • Dry Cooling Tower
  • Dry Cooling Tower
Dry Cooling Tower

Dry Cooling Tower

Rs 1 Lakh  / PieceGet Best Price
Usage/ApplicationIndustrial
BrandGold Cooling Towers
Capacity100kw to 50 MW
Tower MaterialMetal
Tower TypeInduced Draft
Tower DesignClosed Loop
Supply PhaseSingle Phase
About …

Gold Cooling Towers is a young and dynamic and leading company in the field of manufacturing New  FRP Cooling towers over the past 12 years with full-fledged mfg. capacity upto 1500TR, offering single source responsibility for complete water-cooling solutions to industry.

Introduction – DRY COOLING TOWERS (Remote Radiate)

 Now, taking more responsibility for manufacturing customer’s most required Water savage, lowest annual cost and lowest noise level towers like DRY COOLING TOWERS.

  DRY COOLING TOWERS are in a single unit can be provided incapacities

from 100KW to 1500KW and they can be multiplexed to reach many thousands of KILOWATTS.

 What Is?

A Dry Cooling Towers?

The Dry Cooling Tower consists of Air Cooled fluid coolers, water is passed through the fluid coolers and atmospheric air is forced through the external fluid coolers. The heat from the water is transferred to the cooling air and the water is cooled.

Why Dry Cooling Towers?

SAY “YES” TO ALL “NOS” BELOW.

 NO          Scale-formation                                  

NO          contamination of air

NO          frequent maintenance

NO          WATER requires after first.              

NO          Moving parts except Fan & Motor.

NO          Mixing of Dust/Dirt/Fly Ash with water

NO          need of water softening plant & Chemicals.

NO          Heat Exchanger Headaches at Primary Circuit

Installation

 The Dry Cooling Towers water line connections are flanged for quick installation and it can be used for the following major applications

 1.             POWER GENETAIONS / GENSETS 

2. AIR COMPRESSOR COOLING / AFTER COOLER / INTER COOLER/ JACKET

 Technical Specification

 Air-Cooled Fluid Coolers

 

Air-Cooled fluid coolers are being produced in our most modern plant of International standards. The design, selection, construction of air-cooled fluid coolers are through computer which gives very accurate thermal transfer. The Tubes and fins can be Copper, Aluminum.

 Fans

Axial flow fans are directly driven by motor. The fans are of aluminum die cast with adjustable pitch and are individually tested for different flow rate. They are all dynamically balanced. Since, the complete fan is of aluminum alloy it does not corrode when used in outdoor application.

 Motor

 The motors are IP 55 Class with F class insulation and low rpm of the motor minimize noises and increases efficiency. Motors are specially designed to take the moisture / rain, dust and to withstand atmospheric temp. up-to 120oC.

 Enclosure

 Mild steel sheets of heavy gauge steel are used for enclosure construction. The units are powder coated with 80 microns

Base Frame

The entire unit is assembled on heavy duty channel base frame and it can be placed in open ground or can be mounted on roof top depending upon the job site requirements. The structures are rigid and are painted suitably to give protection against corrosion.


View Complete details

get quoterequest a call back
Induction Melting Furnace Dry Cooling Tower

Induction Melting Furnace Dry Cooling Tower

Rs 1 Lakh  / NumberGet Best Price

Minimum Order Quantity: 1 Number

Usage/ApplicationIndustrial
Cooling Capacity100 KW TO 50 MW
BrandGOLD COOLING TOWERS
Capacity100 KW TO 50 MW
Tower DesignClosed Loop
Supply PhaseThree Phase

We are involving in Manufacturer and Exporter of Foundry Dry Cooling Tower in Coimbatore.

 

Technical Specifications

 

Tower Type

Induced Draft

Usage/Application

Induction Melting furnace Industrial

Supply Phase

Three Phase

Capacity

100 kw to 50 MW

Shape

vertical OR horizontal TYPE

Brand

Gold Cooling Towers

Tower Material

Metal

Tower Design

Closed Loop




Additional Information:

  • Item Code: GDCT02
  • Production Capacity: 10 / MONTH
  • Delivery Time: 4 WEEKS

View Complete details

get quoterequest a call back
Dry Type Remote Cooler

Dry Type Remote Cooler

Rs 10,000  / NumberGet Best Price

Minimum Order Quantity: 1 Number

Coolant UsedWater
Capacity100kw to 50 mw
We export A Generator Dry type remote coolers. We are manufacturing Quality Dry type remote coolers for Generator.we are offering single source responsibility for complete water-cooling solutions to industry.Introduction : DRY COOLING TOWERS (Remote Radiate)

 Now, taking more responsibility for manufacturing customerâ????s most required Water savage, lowest annual cost and lowest noise level towers like DRY COOLING TOWERS.

  DRY COOLING TOWERS are in a single unit can be provided incapacities

from 100KW to 3000KW and they can be multiplexed to reach many thousands of KILOWATTS.

 What Is?

A Dry Cooling Towers?

The Dry Cooling Tower consists of Air Cooled fluid coolers, water is passed through the fluid coolers and atmospheric air is forced through the external fluid coolers. The heat from the water is transferred to the cooling air and the water is cooled.

Why Dry Cooling Towers?

SAY â????YESâ???? TO ALL â????NOSâ???? BELOW.

 NO          Scale-formation                                  

NO          contamination of air

NO          frequent maintenance

NO          WATER requires after first.              

NO          Moving parts except Fan & Motor.

NO          Mixing of Dust/Dirt/Fly Ash with water

NO          need of water softening plant & Chemicals.

NO          Heat Exchanger Headaches at Primary Circuit

Installation

 The Dry Cooling Towers water line connections are flanged for quick installation and it can be used for the following major applications

 1.             POWER GENETAIONS / GENSETS 

2. AIR COMPRESSOR COOLING / AFTER COOLER / INTER COOLER/ JACKET

 Technical Specification

 Air-Cooled Fluid Coolers

 

Air-Cooled fluid coolers are being produced in our most modern plant of International standards. The design, selection, construction of air-cooled fluid coolers are through computer which gives very accurate thermal transfer. The Tubes and fins can be Copper, Aluminum.

 Fans

Axial flow fans are directly driven by motor. The fans are of aluminum die cast with adjustable pitch and are individually tested for different flow rate. They are all dynamically balanced. Since, the complete fan is of aluminum alloy it does not corrode when used in outdoor application.

 Motor

 The motors are IP 55 Class with F class insulation and low rpm of the motor minimize noises and increases efficiency. Motors are specially designed to take the moisture / rain, dust and to withstand atmospheric temp. up-to 120oC.

 Enclosure

 Mild steel sheets of heavy gauge steel are used for enclosure construction. The units are powder coated with 80 microns

Base Frame

The entire unit is assembled on heavy duty channel base frame and it can be placed in open ground or can be mounted on roof top depending upon the job site requirements. The structures are rigid and are painted suitably to give protection against corrosion.


 



Additional Information:

  • Item Code: GDCT03
  • Production Capacity: 10/ months
  • Delivery Time: 4 WEEKS

View Complete details

get quoterequest a call back

EXPLORE MORE CATEGORIES