Gold Cooling Towers

Cooling Tower Motors are the products of the expertise of highly qualified technical team with a stage wise rigid inspection method under TQM concept.

Salient Feature :
The Motors are rugged in construction and are designed for satisfactory operation at wide voltage fluctuations.
Special care is taken in design for Cooling Tower application.
Higher efficiency and power factor ensuring lower power consumption and lower operating temperature of the motor.
Motors with Ip55 degree of protection and class 'F' insulation.
Shaft extension as per customer requirement (can be provided with lock nuts).
Rotors used are pressure die cast and dynamically balanced.
Connections are made by electric brazing to eliminate loose connection.
Winding is varnished using vacuum impregnation and treated for protection against humid atmosphere.
Bearings are shrunk fit in bearing seats which are ground to close tolerances.
Mounting : V1 (Shaft downward position)
Relative Humidity : 90 %
Flange : B- as per IS - 2223
Shaft can be supplied with stainless steel material AISI - 410 as per customer requirement.

Additional Information:

• Item Code: GMTR01
• Production Capacity: 20/WEEK
• Delivery Time: 2 DAYS

Cooling Tower Motors are the products of the expertise of highly qualified technical team with a stage wise rigid inspection method under TQM concept.

Salient Feature :
The Motors are rugged in construction and are designed for satisfactory operation at wide voltage fluctuations.
Special care is taken in design for Cooling Tower application.
Higher efficiency and power factor ensuring lower power consumption and lower operating temperature of the motor.
Motors with Ip55 degree of protection and class Finsulation.
Shaft extension as per customer requirement (can be provided with lock nuts).
Rotors used are pressure die cast and dynamically balanced.
Connections are made by electric brazing to eliminate loose connection.
Winding is varnished using vacuum impregnation and treated for protection against humid atmosphere.
Bearings are shrunk fit in bearing seats which are ground to close tolerances.
Mounting : V1 (Shaft downward position)
Relative Humidity : 90 %
Flange : B- as per IS - 2223
Shaft can be supplied with stainless steel material AISI -410 as per customer requirement.

Additional Information:

• Production Capacity: 20/ WEEK
• Delivery Time: 1 WEEK

Cooling Tower Motors are the products of the expertise of highly qualified technical team with a stage wise rigid inspection method under TQM concept.

Salient Feature :
The Motors are rugged in construction and are designed for satisfactory operation at wide voltage fluctuations.
Special care is taken in design for Cooling Tower application.
Higher efficiency and power factor ensuring lower power consumption and lower operating temperature of the motor.
Motors with Ip55 degree of protection and class F insulation.
Shaft extension as per customer requirement (can be provided with lock nuts).
Rotors used are pressure die cast and dynamically balanced.
Connections are made by electric brazing to eliminate loose connection.
Winding is varnished using vacuum impregnation and treated for protection against humid atmosphere.
Bearings are shrunk fit in bearing seats which are ground to close tolerances.
Mounting : V1 (Shaft downward position)
Relative Humidity : 90 %
Flange : B- as per IS - 2223
Shaft can be supplied with stainless steel material AISI - 410 as per customer requirement.

Product Description
Cooling Tower Motors are the products of the expertise of highly qualified technical team with a stage wise rigid inspection method under TQM concept.

Salient Feature :
The Motors are rugged in construction and are designed for satisfactory operation at wide voltage fluctuations.
Special care is taken in design for Cooling Tower application.
Higher efficiency and power factor ensuring lower power consumption and lower operating temperature of the motor.
Motors with Ip55 degree of protection and class F insulation.
Shaft extension as per customer requirement (can be provided with lock nuts).
Rotors used are pressure die cast and dynamically balanced.
Connections are made by electric brazing to eliminate loose connection.
Winding is varnished using vacuum impregnation and treated for protection against humid atmosphere.
Bearings are shrunk fit in bearing seats which are ground to close tolerances.
Mounting : V1 (Shaft downward position)
Relative Humidity : 90 %
Flange : B- as per IS - 2223
Shaft can be supplied with stainless steel material AISI  410 as per customer requirement.

Additional Information:

• Item Code: MOTOR005
• Production Capacity: 100 NOS
• Delivery Time: 1- 2 DAYS